You are here: Home > Products > Exhaust
Catalytic Converters Downpipes Exhaust Mid Pipes
Exhaust Systems Exhaust Tips and Parts Headers and Manifolds
Mufflers Test Pipes Turbo Exhaust Parts
Sort By:
Page of 8
P2M 80mm 2 Bolt Exhaust Gasket

P2M 3" (80mm) 2 bolt exhaust gasket with fire ring.  Same quality used in high end Japanese aftermarket exhaust systems.

List Price: $5.00
Sale Price: $4.25
You save $0.75!
P2M 70mm 3 Bolt Down Pipe Gasket

P2M 70mm 3 bolt down pipe gasket with fire ring.  Most often used in turbo elbow pipe in Nissan applications.

List Price: $5.00
Sale Price: $4.25
You save $0.75!
P2M Muffler Hanger Bushing Kit - Adjustable Height

P2M adjustable muffler hanger bushing is 50% stiffer over stock rubber bushing.  The 3 hole configuration allow installer to choose the install height of the exhaust system (3 settings).

List Price: $9.95
Sale Price: $8.46
You save $1.49!
Megan Racing Universal Exhaust 2 Bolt Flange 2.5

Model Number : FLANG-225- For 2.5" pipe

*Most of the images provided are for illustration purposes only and may not be the actual products.

* All Megan Racing Exhaust and Suspension products are deemed for "off-road use only"

List Price: $10.00
Sale Price: $8.50
You save $1.50!
Megan Racing Universal Exhaust 2 Bolt Flange For 3.0" Pipe

Model Number : FLANG-23- For 3" pipe

*Most of the images provided are for illustration purposes only and may not be the actual products.

* All Megan Racing Exhaust and Suspension products are deemed for "off-road use only"

List Price: $12.00
Sale Price: $8.50
You save $3.50!
Megan Racing Universal Exhaust O2 Bung With Cap

Model Number : O2 BUNG
Different engine setups sometimes require an extra o2 sensor bung for extra monitoring gauges. That, or if an o2 bung needs to be capped, this item is what you need.

- Made from Mild stainless steel.

- Comes with the cap

- Universal 02/wideband sensor bung

- o2 Sensor Thread Pitch: M18x1.50

NOTE: All Megan Racing Exhaust and Suspension products are deemed for "off-road use only"-- please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Many states are more stringent on exhaust modification laws and to pass SMOG. Please check your local laws.

Please follow the link for more information as well as street-legality information for California residents:

List Price: $15.00
Sale Price: $9.99
You save $5.01!
Megan Racing Universal Exhaust Mechanical O2 Fix

You are buying a Brand New in Box, Never Installed or Used, 100% Authentic - Megan Racing Exhaust Accessories

Model Number : 02 extension

On ODB-II vehicles (96+), the ECU has two O2 sensors for diagnostic purposes. The first O2 sensor is located before the Catalytic Converter. This O2 sensor is responsible for all the Air/Fuel tuning and is imperative to the operation of the vehicle.The second O2 sensor is located after the Catalytic Converter. The whole purpose of this O2 sensor is to ensure that there is a functioning catalytic converter in the system. The way it can detect this is to make sure that there is a difference in exhaust gasses between the first O2 sensor and the second. If the same exhaust reading is detected, then the ECU knows that there is either a damaged Catalytic Converter or no Catalytic Converter at all.The ECU will then trigger a Check-Engine Light. On some instances, the vehicle will be thrown into a "Null" mode where the vehicle will not go over a certain speed and will be basically rendered useless.This mechanical O2 fix is basically a way to space out the O2 sensor so that it still reads SOME exhaust gasses but it removes the O2 sensor from the direct flow of the gasses as to make the ECU believe there is a restriction in the exhaust gasses such as by a Catalyst.There is NO GUARANTEE that this product will work on your specific application. There are always mixed results depending upon the layout of the exhaust system and the tuning of the ECU, however, this mechanical O2 fix is well known for eliminating most CEL s caused by an O2 Sensor.NOTE: There is no guarantee that this will eliviate your O2 sensor CEL. Some vehicles will need their ECU reset if the CEL is triggered before hand. This Spacer may cause a clearance issue as it spaces the O2 Sensor 36mm (1.43") further than the base of where it seated.- o2 Sensor Thread Pitch: M18x1.50NOTE: All Megan Racing Exhaust and Suspension products are deemed for "off-road use only"-- please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Many states are more stringent on exhaust modification laws and to pass SMOG. Please check your local laws.

Please follow the link for more information as well as street-legality information for California residents:http://www.meganracing.com/tech/faqs.asp?id=67&sub...

*Most of the images provided are for illustration purposes only and may not be the actual products.*

All Megan Racing Exhaust and Suspension products are deemed for "off-road use only"

List Price: $20.00
Sale Price: $17.50
You save $2.50!
Megan Racing Universal Exhaust Flex Pipe 2.25"

Model Number : FLEX225
To meet the demands of today s tuners, Megan Racing will not start to develop more universal exhaust pieces. All of our universal exhaust pieces are constructed of T-304 stainless steel and have the quality of our production pieces.

This flex section is designed for 2.25" exhaust piping and will help reduce fatigue in an exhaust system caused by vibration. It will also slightly effect the tone of an exhaust and reduce "Rasp". The effects are very similar to a resonator.

- 2.25" piping, 5" long

- Absorbs Vibration

NOTE: All Megan Racing Exhaust and Suspension products are deemed for "off-road use only"-- please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Many states are more stringent on exhaust modification laws and to pass SMOG. Please check your local laws.

Please follow the link for more information as well as street-legality information for California residents:
* Most of the images provided are for illustration purposes only and may not be the actual products.
* All Megan Racing Exhaust and Suspension products are deemed for "off-road use only"

List Price: $25.00
Sale Price: $19.99
You save $5.01!
P2M Muffler Hanger Bushing Kit

P2M muffler hanger bushing kit (set of 3 pcs) replace the stock worn out bushing to prevent exhaust system from flopping while driving. The bushing kit is 50% stiffer over stock, will reduce exhaust vib

List Price: $25.00
Sale Price: $21.25
You save $3.75!
Megan Racing Universal Exhaust Clamp 3

Model Number : S0053
To meet the demands of today s tuners, Megan Racing will not start to develop more universal exhaust pieces. All of our universal exhaust pieces are constructed of T-304 stainless steel and have the quality of our production pieces.

This exhaust clamp is designed as a more efficient way to conjoin Slip-On exhaust pieces. It applies force evenly and in a manner that will not create a "Crimp" in the piping or unusual bend.

- Fits 74-77mm Piping.
- Constructed of Durable Stainless Steel

List Price: $30.00
Sale Price: $24.99
You save $5.01!
Megan Racing Universal Exhaust Mechanical O2 Fix Version 2

You are buying a Brand New in Box, Never Installed or Used, 100% Authentic - Megan Racing Exhaust Accessories

Model Number : 02 extension V2

On ODB-II vehicles (96+), the ECU has two O2 sensors for diagnostic purposes. The first O2 sensor is located before the Catalytic Converter. This O2 sensor is responsible for all the Air/Fuel tuning and is imperative to the operation of the vehicle.The second O2 sensor is located after the Catalytic Converter. The whole purpose of this O2 sensor is to ensure that there is a functioning catalytic converter in the system. The way it can detect this is to make sure that there is a difference in exhaust gasses between the first O2 sensor and the second. If the same exhaust reading is detected, then the ECU knows that there is either a damaged Catalytic Converter or no Catalytic Converter at all.The ECU will then trigger a Check-Engine Light. On some instances, the vehicle will be thrown into a "Null" mode where the vehicle will not go over a certain speed and will be basically rendered useless.This mechanical O2 fix is basically a way to space out the O2 sensor so that it still reads SOME exhaust gasses but it removes the O2 sensor from the direct flow of the gasses as to make the ECU believe there is a restriction in the exhaust gasses such as by a Catalyst.There is NO GUARANTEE that this product will work on your specific application. There are always mixed results depending upon the layout of the exhaust system and the tuning of the ECU, however, this mechanical O2 fix is well known for eliminating most CEL s caused by an O2 Sensor.NOTE: There is no guarantee that this will eliviate your O2 sensor CEL. Some vehicles will need their ECU reset if the CEL is triggered before hand.- o2 Sensor Thread Pitch: M18x1.50 NOTE: All Megan Racing Exhaust and Suspension products are deemed for "off-road use only"-- please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Many states are more stringent on exhaust modification laws and to pass SMOG. Please check your local laws.

Please follow the link for more information as well as street-legality information for California residents:http://www.meganracing.com/tech/faqs.asp?id=67&sub...

*Most of the images provided are for illustration purposes only and may not be the actual products.*
All Megan Racing Exhaust and Suspension products are deemed for "off-road use only"

List Price: $30.00
Sale Price: $25.60
You save $4.40!
Megan Racing Universal Exhaust Flex Pipe 3"

Model Number : Flex3
To meet the demands of today s tuners, Megan Racing will not start to develop more universal exhaust pieces. All of our universal exhaust pieces are constructed of T-304 stainless steel and have the quality of our production pieces.

This flex section is designed for 3" exhaust piping and will help reduce fatigue in an exhaust system caused by vibration. It will also slightly effect the tone of an exhaust and reduce "Rasp". The effects are very similar to a resonator.


- 3" piping, 8" long

- Absorbs vibration.

NOTE: All Megan Racing Exhaust and Suspension products are deemed for "off-road use only"-- please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Many states are more stringent on exhaust modification laws and to pass SMOG. Please check your local laws.

Please follow the link for more information as well as street-legality information for California residents:
* Most of the images provided are for illustration purposes only and may not be the actual products.
* All Megan Racing Exhaust and Suspension products are deemed for "off-road use only"

List Price: $49.00
Sale Price: $39.99
You save $9.01!
Megan Racing Universal Exhaust Donut Flange + Donut For 2.5" Piping

Model Number : S00625-NEW
To meet the demands of today s tuners, Megan Racing will start to develop more universal exhaust pieces. All of our universal exhaust pieces are constructed of T-304 stainless steel and have the quality of our production pieces.

This donut Gasket & Flange combination is designed for 2.5" piping. Used heavily in Sport Compact applications including the installation for the 4-1 JDM Replica headers for the Integra GSR (SSH-AI94G). Constructed of Stainless steel and designed for a perfect fit using standard 2.5" piping.

List Price: $40.00
Sale Price: $39.99
You save $0.01!
Megan Racing Universal Resonator OD 2.48"

Model Number : MR-CC-UNIV225
The body is constructed of Stainless Steel that is polished and much thicker than most exhaust components.

This is NOT a bolt-on component and is designed for custom applications, it must be welded on. The inlet and outlet feature a 2.48"/63mm OD that will accomidate most custom piping applications.


- 16" Long

- 2.48"/63mm Outter Diameter piping

- 2.38"/60mm Inner Diameter piping

- Weighs 3 Lbs

List Price: $50.00
Sale Price: $39.99
You save $10.01!
P2M Nissan S13 SR20DET Aluminum Hotpipe - No BOV

P2M 2.25" polished aluminum hotpipe for S13 SR20DEt replace the 3pc factory 2" hotpipe.  This hotpipe was built with no BOV flanged.  All P2M hotpipe comes with complete couplers for install for factory

List Price: $50.00
Sale Price: $42.50
You save $7.50!
Megan Racing Universal Exhaust Muffler 2.5" Piping 3.5" Burnt Chrome Tip

Model Number : MR-UT-BRT
Megan Racing universal tips have stylish designs and made to last. Great accessories to dress up your rides. Tips are sold individually.

Spec:

- Total Length: 7.5"
- Total Height: 3.5"
- Inlet ID: 2.4"
- Inlet OD: 2.5"
- Tip ID: 3.2"
- Tip OD: 3.5"

- Stylish Burnt Chrome finish

- Stainless steel rolled, round slanted tip

- Universal, welding and cutting, professional installation required

- 1 year limited warranty

- *Do not use any chemical substance on burnt chrome tip portion, discoloration or scratches does not cover under warranty

NOTE: All Megan Racing Exhaust and Suspension products are deemed for "off-road use only"-- please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Many states are more stringent on exhaust modification laws and to pass SMOG. Please check your local laws.

Please follow the link for more information as well as street-legality information for California residents:


List Price: $45.00
Sale Price: $45.95
Megan Racing Stainless Test Pipe For 97-01 Mitsubishi Mirage

Model Number : MR-CC-MM97
Megan Racing Stainless Steel Resonators and Test Pipes offer the ultimate in high-flow performance. Offering substantial horsepower gains in the higher-end of the power band, the Megan Racing Test-Pipes are made of Stainless Steel with a quality polished finish. The Megan Racing Universal Resonators are also made of Stainless Steel and utilize a straight-through design and serve to give your custom exhaust system a more mellow-deep tone. (NOTE: The test-pipe is for off-road use only and is not intended for public highway use. o2 Simulators may be required if a CEL is triggered.)

NOTE: *For off-road/race-use only*

Specifications & Features:

- 2.5" inlet (OD), works out great along with our down-pipe and cat-back exhaust system

- Increase exhaust flow and engine performance

- 100% Stainless steel with a Polished finish

- Bolt-on design, easy installation

- o2 Sensor Thread Pitch: M18x1.50

NOTE: All Megan Racing Exhaust and Suspension products are deemed for "off-road use only"-- please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Many states are more stringent on exhaust modification laws and to pass SMOG. Please check your local laws.

Please follow the link for more information as well as street-legality information for California residents:
http://www.meganracing.com/tech/faqs.asp?id=67&subject=Are%20Megan%20Racing%20exhaust%20products%20street-legal?

List Price: $56.00
Sale Price: $45.99
You save $10.01!
Megan Racing Universal Resonator OD 3"

Model Number : MR-CC-UNIV3
The body is constructed of Stainless Steel that is polished and much thicker than most exhaust components.

This is NOT a bolt-on component and is designed for custom applications, it must be welded on. The inlet and outlet feature a 2.48"/63mm OD that will accomidate most custom piping applications.


- 15.5" Long

- 3"/76mm Outter Diameter piping

- 2.9"/73.5mm Inner Diameter piping

- Weighs 4 Lbs

List Price: $56.00
Sale Price: $45.99
You save $10.01!
Megan Racing Stainless Test Pipe For 90-91 Acura Integra LS / RS

Model Number : MR-CC-AI90
Megan Racing Stainless Steel Resonators and Test Pipes offer the ultimate in high-flow performance. Offering substantial horsepower gains in the higher-end of the power band, the Megan Racing Test-Pipes are made of Stainless Steel with a quality polished finish. The Megan Racing Universal Resonators are also made of Stainless Steel and utilize a straight-through design and serve to give your custom exhaust system a more mellow-deep tone. (NOTE: The test-pipe is for off-road use only and is not intended for public highway use. o2 Simulators may be required if a CEL is triggered.)

NOTE: *For off-road/race-use only*

Specifications & Features:

- Increase exhaust flow and engine performance

- 100% Stainless steel with a Polished finish

- Bolt-on design, easy installation

- o2 Sensor Thread Pitch: M18x1.50

- Inlet 2.25" ID; Outlet 2 3/8" ID; 16 3/8" in length

APPLICATION:
Acura Integra LS/RS 90-91

NOTE: All Megan Racing Exhaust and Suspension products are deemed for "off-road use only"-- please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Many states are more stringent on exhaust modification laws and to pass SMOG. Please check your local laws.

Please follow the link for more information as well as street-legality information for California residents:

List Price: $56.00
Sale Price: $49.99
You save $6.01!
P2M Nissan 1989-98 240SX Test Pipe

P2M 3" stainless test pipe replaces the stock catalytic converter for better engine performance especially under turbocharged applications. By reducing the exhaust system back pressure also keeps the engine temperature running cooler. Works for both KA24 and SR20 motors.

List Price: $60.00
Sale Price: $51.00
You save $9.00!
Megan Racing Stainless Test Pipe For 94-00 Acura Integra GSR

Model Number : MR-CC-AI94GSR
Megan Racing Stainless Steel Resonators and Test Pipes offer the ultimate in high-flow performance. Offering substantial horsepower gains in the higher-end of the power band, the Megan Racing Test-Pipes are made of Stainless Steel with a quality polished finish. The Megan Racing Universal Resonators are also made of Stainless Steel and utilize a straight-through design and serve to give your custom exhaust system a more mellow-deep tone. (NOTE: The test-pipe is for off-road use only and is not intended for public highway use. o2 Simulators may be required if a CEL is triggered.)

NOTE: *For off-road/race-use only*

Specifications & Features:

- Increase exhaust flow and engine performance

- 100% Stainless steel with a Polished finish

- Bolt-on design, easy installation

- o2 Sensor Thread Pitch: M18x1.50

- Inlet 2.25" ID; Outlet 2 3/8" ID; 17.5" in length

NOTE: All Megan Racing Exhaust and Suspension products are deemed for "off-road use only"-- please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Many states are more stringent on exhaust modification laws and to pass SMOG. Please check your local laws.

Please follow the link for more information as well as street-legality information for California residents:

List Price: $63.00
Sale Price: $54.99
You save $8.01!
Megan Racing Stainless Test Pipe For 98-02 Honda Accord 4Cyl

Model Number : MR-CC-HA98L4
Megan Racing Stainless Steel Resonators and Test Pipes offer the ultimate in high-flow performance. Offering substantial horsepower gains in the higher-end of the power band, the Megan Racing Test-Pipes are made of Stainless Steel with a quality polished finish. The Megan Racing Universal Resonators are also made of Stainless Steel and utilize a straight-through design and serve to give your custom exhaust system a more mellow-deep tone. (NOTE: The test-pipe is for off-road use only and is not intended for public highway use. o2 Simulators may be required if a CEL is triggered.)

NOTE: *For off-road/race-use only*

Specifications & Features:

- Increase exhaust flow and engine performance

- 100% Stainless steel with a Polished finish

- Bolt-on design, easy installation

NOTE: All Megan Racing Exhaust and Suspension products are deemed for "off-road use only"-- please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Many states are more stringent on exhaust modification laws and to pass SMOG. Please check your local laws.

Please follow the link for more information as well as street-legality information for California residents:

List Price: $68.00
Sale Price: $54.99
You save $13.01!
Megan Racing Stainless Test Pipe For 94-00 Acura Integra LS / 88-00 Honda Civic

Model Number : MR-CC-AI94LS
Megan Racing Stainless Steel Resonators and Test Pipes offer the ultimate in high-flow performance. Offering substantial horsepower gains in the higher-end of the power band, the Megan Racing Test-Pipes are made of Stainless Steel with a quality polished finish. The Megan Racing Universal Resonators are also made of Stainless Steel and utilize a straight-through design and serve to give your custom exhaust system a more mellow-deep tone. (NOTE: The test-pipe is for off-road use only and is not intended for public highway use. o2 Simulators may be required if a CEL is triggered.)

NOTE: *For off-road/race-use only*

Specifications & Features:

- Increase exhaust flow and engine performance

- 100% Stainless steel with a Polished finish

- Bolt-on design, easy installation

- o2 Sensor Thread Pitch: M18x1.50

- Inlet 2.25" ID; Outlet 2 3/8" ID; 16 3/8" in length

NOTE: All Megan Racing Exhaust and Suspension products are deemed for "off-road use only"-- please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Many states are more stringent on exhaust modification laws and to pass SMOG. Please check your local laws.

Please follow the link for more information as well as street-legality information for California residents:

List Price: $68.00
Sale Price: $55.49
You save $12.51!
Megan Racing Stainless Test Pipe For Mitsubishi Lancer Evolution Evo 8

Model Number : MR-CC-MLE03
Megan Racing Stainless Steel Resonators and Test Pipes offer the ultimate in high-flow performance. Offering substantial horsepower gains in the higher-end of the power band, the Megan Racing Test-Pipes are made of Stainless Steel with a quality polished finish. The Megan Racing Universal Resonators are also made of Stainless Steel and utilize a straight-through design and serve to give your custom exhaust system a more mellow-deep tone. (NOTE: The test-pipe is for off-road use only and is not intended for public highway use. o2 Simulators may be required if a CEL is triggered.)

NOTE: *For off-road/race-use only*

Specifications & Features:

- 3" inlet, works out great along with our down-pipe and cat-back exhaust system

- Increase exhaust flow and engine performance

- 100% Stainless steel with a Polished finish

- Bolt-on design, easy installation

- o2 Sensor Thread Pitch: M18x1.50

NOTE: All Megan Racing Exhaust and Suspension products are deemed for "off-road use only"-- please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Many states are more stringent on exhaust modification laws and to pass SMOG. Please check your local laws.

Please follow the link for more information as well as street-legality information for California residents:

List Price: $70.00
Sale Price: $59.99
You save $10.01!
Megan Racing Stainless Test Pipe For 92-01 Honda Prelude

Model Number : MR-CC-HP92
Megan Racing Stainless Steel Resonators and Test Pipes offer the ultimate in high-flow performance. Offering substantial horsepower gains in the higher-end of the power band, the Megan Racing Test-Pipes are made of Stainless Steel with a quality polished finish. The Megan Racing Universal Resonators are also made of Stainless Steel and utilize a straight-through design and serve to give your custom exhaust system a more mellow-deep tone. (NOTE: The test-pipe is for off-road use only and is not intended for public highway use. o2 Simulators may be required if a CEL is triggered.)

NOTE: *For off-road/race-use only*

Specifications & Features:

- Increase exhaust flow and engine performance

- 100% Stainless steel with a Polished finish

- Bolt-on design, easy installation

- o2 Sensor Thread Pitch: M18x1.50

NOTE: All Megan Racing Exhaust and Suspension products are deemed for "off-road use only"-- please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Many states are more stringent on exhaust modification laws and to pass SMOG. Please check your local laws.

Please follow the link for more information as well as street-legality information for California residents:

List Price: $73.00
Sale Price: $62.99
You save $10.01!
Megan Racing Stainless Test Pipe For 09+ Acura TL

Model Number : MR-CC-HA08V6
Megan Racing Stainless Steel Resonators and Test Pipes offer the ultimate in high-flow performance. Offering substantial horsepower gains in the higher-end of the power band, the Megan Racing Test-Pipes are made of Stainless Steel with a quality polished finish. The Megan Racing Universal Resonators are also made of Stainless Steel and utilize a straight-through design and serve to give your custom exhaust system a more mellow-deep tone. (NOTE: The test-pipe is for off-road use only and is not intended for public highway use. o2 Simulators may be required if a CEL is triggered.)

NOTE: *For off-road/race-use only*

Specifications & Features:

- Increase exhaust flow and engine performance

- 100% Stainless steel with a Polished finish

- Bolt-on design, easy installation

- No o2 sensor bung on this test pipe.

NOTE: All Megan Racing Exhaust and Suspension products are deemed for "off-road use only"-- please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Many states are more stringent on exhaust modification laws and to pass SMOG. Please check your local laws.

Please follow the link for more information as well as street-legality information for California residents:

List Price: $76.00
Sale Price: $64.99
You save $11.01!
Megan Racing Stainless Test Pipe For 90-93 Honda Accord

Model Number : MR-CC-HA90
Megan Racing Stainless Steel Resonators and Test Pipes offer the ultimate in high-flow performance. Offering substantial horsepower gains in the higher-end of the power band, the Megan Racing Test-Pipes are made of Stainless Steel with a quality polished finish. The Megan Racing Universal Resonators are also made of Stainless Steel and utilize a straight-through design and serve to give your custom exhaust system a more mellow-deep tone. (NOTE: The test-pipe is for off-road use only and is not intended for public highway use. o2 Simulators may be required if a CEL is triggered.)

NOTE: *For off-road/race-use only*

Specifications & Features:

- Increase exhaust flow and engine performance

- 100% Stainless steel with a Polished finish

- Bolt-on design, easy installation

NOTE: All Megan Racing Exhaust and Suspension products are deemed for "off-road use only"-- please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Many states are more stringent on exhaust modification laws and to pass SMOG. Please check your local laws.

Please follow the link for more information as well as street-legality information for California residents:

List Price: $76.00
Sale Price: $64.99
You save $11.01!
Megan Racing Stainless Test Pipe For 94-97 Honda Accord

Model Number : MR-CC-HA94
Megan Racing Stainless Steel Resonators and Test Pipes offer the ultimate in high-flow performance. Offering substantial horsepower gains in the higher-end of the power band, the Megan Racing Test-Pipes are made of Stainless Steel with a quality polished finish. The Megan Racing Universal Resonators are also made of Stainless Steel and utilize a straight-through design and serve to give your custom exhaust system a more mellow-deep tone. (NOTE: The test-pipe is for off-road use only and is not intended for public highway use. o2 Simulators may be required if a CEL is triggered.)

NOTE: *For off-road/race-use only*

Specifications & Features:

- Increase exhaust flow and engine performance

- 100% Stainless steel with a Polished finish

- Bolt-on design, easy installation

- One o2 bung on pipe, cap included should you choose to not use an o2 sensor.

NOTE: All Megan Racing Exhaust and Suspension products are deemed for "off-road use only"-- please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Many states are more stringent on exhaust modification laws and to pass SMOG. Please check your local laws.

Please follow the link for more information as well as street-legality information for California residents:

List Price: $76.00
Sale Price: $64.99
You save $11.01!
aFe Power Mach Force-XP Tip (Stainless Steel) 4 In X 5 Out X 12 L In Bolt-On (Polished Tip)

You are buying on a
Brand New in Box, Never Install and Use, 100% Authentic-aFe Power Exhaust Tip

Manufacturer: AFE Power

Condition: Brand New
in Box

Part Number:
49-92002-PThe polished aFe 304 stainless steel exhaust tip is designed to fit 4" exhaust systems. A 304 stainless steel band clamp ensures a very secure grip. Finally, this exhaust tip features a stainless steel laser-cut logo plate for an aggressive style. With a 4" inlet, 5" outlet and a 12" inch length, this single-walled, slash cut rolled tip is a nice compliment for any 4" exhaust system. *Most of the images
provided are for illustration purposes only and may not be the actual
products.*

Sale Price: $65.65
aFe Power Mach Force-XP Polished Stainless Steel Exhaust Tip 4" In X 5" Out X 12" L

You are buying on a
Brand New in Box, Never Install and Use, 100% Authentic-aFe Power Exhaust Tip

Manufacturer: AFE Power

Condition: Brand New
in Box

Part Number:
49-92002Nothing looks cooler than a huge tip completing your exhaust system. The aFe Power tip is constructed out of high luster, polished 304 stainless steel and has a slash cut with an aFe Power logo laser etched into the top of the tip. A drain port on the bottom keeps rust and corrosion away. This tip has a 4" inlet, 5" Outlet and is 12" long. It can either be bolted on or welded on.
*Most of the images provided are for illustration
purposes only and may not be the actual products.*

Sale Price: $65.65